manualshive.com logo in svg

Sailor 6215 VHF DSC, User & Installation Manual, Page: 36 / 104

Share
Download
Sailor 6215 VHF DSC User & Installation Manual Download Page 36

Chapter 2:  Operation

26

DSC calls

3. Press the selector wheel knob to accept the selected nature of distress.

4. Then lift the cover of the red distress button and push the 

Distress button

 for 3 seconds.

To acknowledge own distress

When the SAILOR 6215 VHF DSC receives an 
acknowledgement of distress from another vessel or 
station, a 2-tone alarm sounds. The display shows 
the MMSI number of the station who sent the 
distress acknowledgement call, the status and the 
time passed since the distress acknowledgement 
arrived (format: mm:ss).

•

Press 

SILENT

 to only switch off the 2-tone alarm. A press on 

any other key

 

also switches off the 2-tone alarm.

•

Press the soft key 

INFO

 to display further data for this call.

•

Press the soft key 

OK

 to view the status of this 

distress call.

If the same Distress call comes in more than once, 
the 2-tone alarm sounds briefly and terminates 
automatically.

Summary of Contents for 6215 VHF DSC









































































































Reviews:

No comments