Sailor 100, Training, Installation & Service Manual

Page: 241 / 262

98-137654-A C-1
Appendix C
CCCC
Sys
tem me
ss
age
s
System messages
C
C.1 Event messages — overview
The SAILOR 100 Satellite TV detects events during
• POST (Power On Self Test) — a self test performed at every
power-up.
• PAST (Person Activated Self test) — started in the web
interface
• CM (Continuous Monitoring) — automatically performed
while the system is in operation.
When the SAILOR 100 Satellite TV detects an event that
requires your action, it issues an event message and the red
Fail/Pass LED in the LED panel of the ACU is lit. As long as an
event is active, it is shown in the ACU display, the Control
Panel and the web interface (in HELPDESK > Event list or click
the event icon on the DASHBOARD).
State the Event ID when contacting your service partner.
The event description might contain a number of digits in
brackets, e.g. (00000005). This is supplemental information
and used for service and diagnostics purposes.
Note
Active events and notifications are shown. As soon as the
event is cleared, it is not displayed any longer. It is then
moved to the Notifications section. Notifications are cleared
after 24 hours.
SAILOR100TM.book Page 1 Tuesday, January 29, 2013 2:44 PM