SAIKO AC-9110CL, Instruction Manual

Page: 3 / 16

(1) Three wind mode: Normal, Natural, Sleeping; (2)Three wind speed:
High, Middle, Low; (3)Humidification/Cooling;
(4)Timing function: 1H, 2H, 4H and 8H, not accumulative; (5)Automatic
horizontal and vertical oscillation;
(6) With remote control;
(7) )Drawer-style water tank for easy cleaning;
(8) High quality cooler master filter with good evaporation capacity and
cooling effect; (9)Cooling: water pump sprinkling cycling system with
larger water circulation volume andfaster cooling effect;
(10) Water tank protection function: when pulling out the water tank, the
product will be power off;
(11) )Dual air filtration;
(12) Omni-directional wheel design for front and rear caster and the rear
caster is with brake; (13)Smart memory for unexpected power outage:
resume to original setting with 30 sec after power on, no manual
setting;
(14) With continuous working protection function: automatic shutdown
after continuous working for 15 hours
FEATURES
FEATURE AND NAMES OF PRODUCT COMPONENTS
3 4
1. Display panel 2. Buttons 3. Remote control receiving
window
4. Vane assembly 5. Water level display window 6. Caster
7. Handle 8. Remote control depository 9. Dustproof filter
10. Reel 11. Power cord 12. Water tank
13 Water tank lock
Accessories
Remote Control
2. Use cleanser and banister brush to clean the dustproof filter.
3.Dip the cooler master filter assemblage into cleanser for several
minutes, then clean and dry it.
●Water tank cleaning
1. Cut off the power and rotate the water tank lock to horizontal
direction, then take the water tank out.
2. Use the towel to clean the incrustation of the water tank by cleanser,
and then use water to wash and pour the dirty water out.
●Machine body cleaning
1. Use wet towel to clean the machine body, washing by water directly
is forbidden.
2. Do not wash by corrosive cleanser or solvent.
3. The power should be off and power cord should be pulled out when
cleaning the machine body, or there is electric shock risk.
●Installation after cleaning
1. Install the dustproof filter, cooler master filter assemblage and water
tank orderly and ensure the installation is correct.
2. Link the power and confirm the machine runs smoothly.
●Maintenance
1. If the machine has not been used for a long time, the power cord
should be pulled out and the machine should be packed to prevent
dust.
2. Please ensure the cooler master filter and dustproof filter is dry and
there is no water in the tank before packing.