Installation
2022/04
Operating instructions Concept PDG 2906 peristaltic dosing pump
26 / 44
Installing an additional pump (Concept 2105 dosing pump)
The Concept PDG 2906 dosing pump is designed to control other dosing pumps (additional
pumps).
Concept PDG 2906
Concept 2105
The Concept 2105 additional pump can be operated in two modes:
•
Parallel operation:
powder dosing unit and Concept 2105 dosing pump are controlled
simultaneously
•
Direct operation:
the Concept 2105 dosing pump is controlled directly via terminal 3
(In1)
1.1.12
Mounting an additional pump
Mount the additional pump next to the Concept PDG 2906 dosing pump
Carry out installation as described in section 10.2 “Installation”
1.1.13
Set jumpers
Open the pump
Use tweezers or flat-nose pliers to set the jumpers
T = Terminating resistor
P = Park position for reserve jumper
Fig. 10: Jumper block
