Instruments and Controls
Direction Lights/Main Beam Lever
Take care not to dazzle oncoming vehicles
when driving using main beam headlights.
2
2
3
4
1
1
Direction Lights
Pull down the lever switch when turning left (figure 1), and
pull upward the lever switch when turning right (figure 2).
The indicators will cancel automatically once a turn has
been completed.
The corresponding GREEN warning light in the instrument
pack will flash in time with the direction indicators. To
indicate a lane change, press the lever briefly and release,
the indicators will flash three times and then cancel.
Headlight Main and Dipped Beam
When the ignition switch is turned to position 2 and the
main beam switch is turned on to position 2, fully pull the
lever switch towards the steering wheel direction (figure
4) to switch on main beam (the BLUE warning light in the
instrument pack illuminates). and fully pull the lever switch
towards the steering wheel direction (figure 4) again to
switch to dipped beam headlights.
Headlights Flash
When the ignition switch is at position 1 or 2, pull the lever
switch towards the steering wheel direction repeatedly
(figure 3), and then release it, the high beam lights will flash
between brightness and dimness.
20
