Starting and Driving
Starting and Driving
Ignition Switch
Do not turn the ignition off or pull out the key
while the car is in motion; this will cause the
steering lock to engage, making it impossible
to steer the car.
0
1
2
3
The ignition switch is located on the right side of the
steering column and uses the following sequence to initiate
the ignition and start the engine.
Position 0
（
（
（
LOCK
）
）
）
• The key can be inserted or removed.
• Lock the steering wheel when turn it left or right
towards after removing the key.
Position 1
（
（
（
ACC
）
）
）
• The engine is stopped, and the key could not be
removed.
• Some electrical equipments and accessories can be
operated, such as wipers, sun roof, etc.
Position 2
（
（
（
ON
）
）
）
• All instruments and electrical circuits are operational.
• The engine runs.
Position 3
（
（
（
START
）
）
）
• Start engine.
When the engine is started, some
electrical equipment will be isolated during cranking.
• Release the key immediately after the engine is started,
and the ignition switch will return to position 2
automatically.
Note: Before starting the engine, ensure that the
gear lever is in the N for Automated Mechanical
Transmission (AMT), or the gear lever is in neutral
position for Manual Transmission (MT).
89
4
