Maintenance
Washer Nozzles
1
2
Operate the washers periodically to check that the nozzles
are clear and properly directed.
The windscreen washer nozzles are configured during the
production, so generally there is no need for adjustments.
To adjust the windscreen washer nozzle, you can insert a
small flat-bladed screwdriver in the upper and bottom gaps
(as indicated by the arrow) between the housing (1) and the
nozzle (2) and turn downward or upward slightly to adjust
to appropriate injection angle.
If the nozzle is obstructed, insert a needle or thin metal
wire into the hole to remove the obstruction.
278
Summary of Contents for MG HS
Page 88: ......
Page 166: ...Seats Restraints normally for those about 7 years old or those older than 7 years old 152...
Page 269: ...Emergency Information Code Specs Function F53 F54 255 5...
Page 272: ......
