background image

Page 15

BARBECUE GUARANTEE

This barbecue is made by Universal Innovations. It is made to an exacting

quality standard and is covered by the following guarantee.

The product is fully guaranteed for 2 years, regarding proper use.

THIS GUARANTEE DOES NOT AFFECT YOUR STATUTORY RIGHTS IN ANY WAY

HELPLINE Dublin Ireland: 00 353 1 2873797

or at

Email: [email protected] / Web: www.uigroup.ie

IF YOU NEED ANY ASSISTANCE PLEASE DO NOT HESITATE TO CONTACT 

US AT THE FACTORY

DO NOT BRING GOODS BACK TO PLACE OF PURCHASE.

Refer to Care and Maintenance section for advise on proper use.

Following these guidelines will ensure better performance and maximum

lifetime of the barbecue.

Universal Innovations strive to lead the field in product design and innovation.

If you have any comments regarding this product we would be delighted to

hear from you.

Troubleshooting

Problem  

 

       Possible Cause  

         Solution

Burner will not light using the          LP gas cylinder is empty             Replace with full cylinder

ignition system
 

 

 

        Faulty regulator  

           Have regulator checked or

 

 

 

 

 

 

           replace

 

 

 

        Obstructions in burner              Clean burner

 

 

 

        Obstructions in gas jets              Clean jets and gas hose

 

 

 

        or gas hose

 

 

 

        Electrode wire is loose              Reconnect wire

 

 

 

        Electrode or wire is  

           Change electrode and wire

 

 

 

        damaged

Low flame or flashback (fire in        LP gas cylinder too small            Use larger cylinder

burner tube - a hissing or

roaring noise may be heard)

 

 

 

        Obstructions in burner              Clean burner

 

 

 

        Obstructions in gas jets              Clean jets and gas hose

 

 

 

        or gas hose

 

 

 

        Windy conditions  

           

Use BBQ in a more

 

 

 

 

 

 

            sheltered position

Gas valve knob difficult to turn              Gas valve jammed  

            Replace gas valve

If you have any queries or require advice or spare parts for this product, please call

our Customer Helpline 353 1 2873797

or for online help - Email: [email protected] / Web: www.uigroup.ie

Summary of Contents for X150

















Reviews: