background image

BARBECUE GUARANTEE

This barbecue is made by Universal Innovations. It is made to an exacting quality standard

and is covered by the following guarantee. The product has a 10 year limited warranty,

regarding proper use.

Sink + Hood: 10 years (no rust through/burn through/excludes fading/colour change)

Cooking grill: 10 years (no rust through/burn through/excludes fading/colour change)

Burner/Vaporising bar/Warming rack: 2 years (no rust through/burn through)

All other parts: 2 years

THIS GUARANTEE DOES NOT AFFECT YOUR STATUTORY RIGHTS IN ANY WAY. IF YOU 

NEED ANY ASSISTANCE PLEASE DO NOT HESITATE TO CONTACT US AT THE FACTORY. 

DO NOT BRING GOODS BACK TO PLACE OF PURCHASE.

HELPLINE Dublin Ireland: 00 353 1 2873797 or at

Email: [email protected] / Web: www.saharabbqs.com

Refer to Care and Maintenance section for advice on proper use. Following these 

guidelines will ensure better performance and maximum lifetime of the barbecue.

Universal Innovations strive to lead the field in product design and innovation. If you 

have any comments regarding this product we would be delighted to hear from you. 

Troubleshooting

Problem    

 

 

  Possible Cause  

         Solution

Burner will not light using the  

  LP gas cylinder is empty   

Replace with full cylinder

ignition system
 

 

 

 

 

  Faulty regulator    

 

Have regulator checked or

          replace
 

 

 

 

 

  Obstructions in burner    

Clean burner

 

 

 

 

 

  Obstructions in gas jets    

Clean jets and gas hose

      

 

or 

gas 

hose

 

 

 

 

 

  Electrode wire is loose    

Reconnect wire

 

 

 

 

 

  Electrode or wire is  

 

Change electrode and wire

      

 

damaged

Low flame or flashback (fire in     LP gas cylinder too small   

Use larger cylinder

burner tube - a hissing or

roaring noise may be heard)

 

 

 

 

 

  Obstructions in burner    

Clean burner

 

 

 

 

 

  Obstructions in gas jets    

Clean jets and gas hose

      

 

or 

gas

 

 

 

 

 

  Windy conditions    

 

Use BBQ in a more

          

 

 sheltered 

position

Gas valve knob difficult to turn     Gas valve jammed  

 

Replace gas valve

If you have any queries or require advice or spare parts for this product, please call

our Customer Helpline 353 1 2873797

or for online help - Email: [email protected] / Web: www.saharabbqs.com

Summary of Contents for S325





















Reviews: