_
English
_
ASSEMBLY OF THE HEATER
Before using the heater, the feet (supplied separately in the
carton), must be fitted to the unit. These are to be attached to
the base of the heater using the 4 self-tapping screws provided,
taking care to ensure that they are located correctly in the
bottom ends of the heater side moldings.
OPERATION
NOTE: It is normal when the heaters are turned on for the first time or when they are turned
on after having not been used for a long period of time to emit some smell and fumes. This
will disappear when the heater has been on a short while.
CH310T
Convector heater with thermostat and fan CH310T
1.
Choose a suitable location for the heater, taking into account the safety instructions above.
2.
Insert the plug of the heater into a suitable socket.
Heat switch
Thermostat
Fan switch
