Remote Control Instructions
POWER BUTTON:
Turn the heater ON/OFF
Note:
All of our heaters and their remote controls have the same
frequency, so it is possible to control several heaters with
just
one
remote.
PUSH SWITCH:
turn on the switch on the top of heater, then use the
remote to turn the heater on and off. Without the remote control, the
heater will not operate. If you misplace your remote control, please
contact us for a replacement. Please call our Customer Helpline
353 1 2873797 or for online help:
Email: [email protected] / Web: www.saharabbqs.com
Inserting the Batteries (not included)
Insert 2 x AAA/ Alkaline type batteries into your remote control.
• Flip the backside of your remote control and pull out the battery cover. Insert the batteries in
accordance with the instructions and polarity of the batteries.
• Change the batteries in the same way as detailed above.
Troubleshooting
1. Check if the power cord is plugged into an electrical outlet. If not, plug it in.
2. Check if the electricity to the main fuse is working.
CLEANING AND MAINTENANCE
Regular and careful cleaning helps your infrared heater to operate efficiently for many trouble-free
years. To clean your heater, follow the steps below:
1. Unplug the power cord for your safety before cleaning your appliance.
2. Make sure the heater is cool before continuing.
3. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use
a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. (CAUTION: DO NOT
let liquids enter the heater).
4. DO NOT use alcohol, gasoline, abrasive powders, furniture polish or rough brushes to clean the
heater. This may cause damage or deterioration to the surface of the heater.
5. DO NOT immerse the heater in water.
6. Wait until the heater is completely dry before use.
Storage:
Store the heater in a cool, dry place when not in use to prevent dust and dirt build up.
Use the packaging carton to store.
Page 4
Summary of Contents for 1500W Hanging Electric Heater
Page 6: ......