Sagola ATLANTA 200 PLUS, Instruction Manual / Spare Parts List

Page: 14 / 36

- 14 -
Before starting the unit you must read, take into consideration
and comply with all the indications described in this Manual.
This manual must be kept in a safe place, accessible to all
users of the unit.
The unit must be started and handled exclusively by
personnel instructed in its use and must be employed only
for the purpose for which it was designed.
Likewise, accident prevention standards, work centre
regulations and directives and current legislation and
restrictions must be taken into consideration at all times.
SAGOLA S.A., the SAGOLA logotypes and other SAGOLA
products mentioned in this manual are registered trademarks
or brand names of the company SAGOLA S.A.
1. WARNING
This unit belongs to the family of devices designed to spray
products with high pressure electrically which is used for the
airless spraying (airless) various coating materials, operated
by means of a spray gun. They provide a high level of product
transfer and excellent quality finish, as well as low levels of
contamination.
The equipment consists of the following standard features:
- Pump model ATLANTA 200 PLUS
- Instruction manual
- Case
As optional and complementary elements of the equipment,
in this Manual the following are included:
- Product hoses
- Mixed Gun
- Spray air caps:
- Fixed Spray Fan
- Rotational (Self-cleaning)
2. INTRODUCTION
Equipment provided with an electric motor that activates the
hydraulic device which provides the pressure necessary to
spray the product.
The unit is supplied in:
- With a gravity cup, which is filled with the product to be
applied.
3. TECHNICAL DETAILS
ATLANTA 200 PLUS
Electric motor Single phase. Switch with heat protection
Voltage 220 Volts
Frecuency 50 Hz
Power 740 w (1 CV)
Consumption 5,4 A
Earthed plug
Minimun section 3 x 1,5 mm 2
Sump oil Renolín MR-10
Sump capacity Minimum 0,65 L Maximum 0,75 L
Adjustable pressure 0 - 160 bar (0-2.400 psi)
Free flow 2 L/min. (viscosity water) (0,52 gal/min.)
Product inlet Round Metric thread 22 x 3 male
Product outlet Thread GAS 1/4" BSP male
MAXIMUM Spray air cap size 0,018”
Dimensions: 420x250x630 mm.
Weight: 27 kg
Approvals