22
NO DMX BEHAVIOR
FREEZE/BLACKOUT
No DMX working mode
FREEZE: without DMX the projector stays
in the last configuration (this mode does
not work with strobe)
BLACKOUT: without DMX the projector
switches off
Press ENTER and UP/DOWN to
set the specific mode
DEFAULT SETTINGS
FACTORY/USER1/USER2
Load default settings:
FACTORY = LOAD: Factory settings can be
loaded only
USER1 = LOAD/SAVE: user setting that can
be saved and after reloaded
USER2 = LOAD/SAVE: user setting that can
be saved and after reloaded
Press ENTER and UP/DOWN to
set the specific mode
TEMP INFO
VALU: xx C
Value of temperature
FIRMWARE
V.1.02A
Software version
5.2 – MASTER/SLAVE MODE
In this mode, more units can be linked together as a single chain and work in a synchronized
way.
•
Link together all the units from the connector DMX OUT to DMX IN.
•
Define the first unit of the chain as MASTER, all other units must be set in SLAVE mode
(SLAVE MODE).
•
Operate the Master unit in Automatic mode (AUTO RUN – EFFECT MODE) or Static mode
(STSTIC COLOR) to operate the entire system. The entire chain of Slave unit will act as the
Master unit
