Ground the wire
The SGT-LD-5-23 is shipped with a grounding wire. The unit must be properly grounded to
protect against power surges. The grounding point can be found on the bottom of the unit.
It is supplied with an appropriate grounding lug for attachment to the ODU (Outdoor Unit).
Power On
To power up the SGT-LD-5-23, follow the steps below:
1
Plug a user-supplied Cat-5 Ethernet cable from your wired LAN (or a computer) into
the power injector RJ-45 jack (
DATA IN
);
2
Plug a user-supplied Cat-5 Ethernet cable from the SGT-LD-5-23 into the power
injector RJ-45 jack (
P+DATA OUT
);
3
Connect the power module to the power injector and plug the AC cord into an AC
power receptacle.
4
After being powered on, the device will send out the beep sound lasting about 1.5
seconds, informing you that the SGT-LD-5-23 is powered up. Wait for about 60
seconds - the system will be initialized and start working.
