Chapter 5 Management Page 44
Access Control
The Access Control allows a STA to access a SGT-LD-5-23
;
thus, a further security mechanism is
provided. This function is available only under Base Station mode.
Open
“
Access Control
” in “
Wireless
” as below, check “
Turn Access Control On
” to enable this
function.
Figure 31 Access Control
Available CPEs
This table lists the CPEs currently connecting to the SGT-LD-5-23. Check the box before each
MAC address, click
“
Add
” to add one or more available CPE(s) into the “
Trusted CPEs
” and click
“
Apply
” to save settings.
Add New CPE Manually
Enter the MAC address of the CPE that you would like to list into the access control list, click
“
Add
”,
then the CPE will be added into the
“
Trusted CPEs
”.
Trusted CPEs
Check the box before one or more MAC addresses of CPEs that you would like to cancel and click
“
Delete
” to cancel that access control rule.
