Chapter 3 Basic Settings Page 23
Figure 12 Vent
Connect Up
Before installing the Ethernet cable with a waterproof RJ-45 connector, it is recommended that the
Cat-5 RJ-45 coaxial cable be used for the SGT-LD-5-23 to power PoE connector.
1.
To connect to the hole labelled
PoE+Data
, open the black cover in advance by using a coin or a
slotted screwdriver and then screw in the body of the gland and tighten.
Figure 13 Connect Up
– Step 1
2.
Slide the sealing nut to the RJ-45 cable from its middle breach and then insert the sealing into
the cable.
Figure 14 Connect Up
– Step 2
Slide the Sealing Nut from its Breach
Vent
