SAGEMCOM Seen, User Manual

Page: 16 / 27

Seen – Seen A
15
- To change it, enter the new date in DD/MM/YY or MM/DD/YY format.
3. Press .
If you make a mistake while entering data, use keys

or

.
Hour format (12H/24H)
1. Go to the menu "
hs settings
"

"
Date & time
"

"
time format
".
2. Change the status using the keys

or

.
3. Press .
Date format
1. Go to the menu "
hs settings
"

"
Date & time
"

"
date format
".
2. Change the status using the keys

or

. Press .
Setting the alarm
1. Go to the menu "
hs settings
"

"
alarm
".

To deactivate the alarm, select "
OFF
".

To activate the alarm once, select "
ON
".
2. Press .
3. Enter the time at which you would like the alarm clock to sound: "
HH – mm
".
4. Press . «
Snooze
» (repetition) is displayed on the screen. Press .

"
ON
" : to activate alarm repetition every 5 minutes.

"
OFF
" : to deactivate alarm repetition.
The icon
is displayed on the screen. Your alarm is now set.
ADVANCED SETTINGS
Association of other handsets with your base
1. Press and hold the pairing button on the base for 5 seconds (If no handset has been
detected within a minute the pairing mode will stop and your base return to standby).
2. Go to the menu "
registration
".
3. Enter the 4 digit base master PIN code (default 0000). Press .
4. The screen will display the number of the handset that has been paired with the base.
Restoring the handset / hase Default Settings
1. Go to the menu "
default
".
2. Enter the base master PIN code (default 0000). Press .
3. A screen displays a request to confirm.
4. Press .
Deleting a handset
1. Go to the menu "
Bs settings
"

"
delete hs
".
2. Enter the base master PIN code (default 0000). Press .
3. Select the handset you want to delete using the

or

key then press key.
Modifying the dialing mode
Most telephone systems use the tone dialling mode. You can, however, use the pulse dialling
mode:
1.
Go to the menu "
Bs settings
"

"
Dial mode
".
2. Change the status using the keys

or

.
3.
Press .