MF 9841 MF 9626/9631/9841 1 – 8
2)
Remove the waste toner box.
3)
Detach the LSU cleaning bar from the front cover.
4)
Turn the felt side of the cleaning bar downward and insert it.
Slide it back and forth a few times to clean the LSU dust-proof
glass.
5)
Replace the LSU claning bar to the front cover and attach the
waste toner box.
6)
Close the front cabinet.
F. Install of the paper exit tray
1)
Install the paper exit tray (package part No. 4) (A) to the upper
section of the right door.
Install the paper exit full detection actuator (package part No.
5) (B).
* Be careful of the direction of the paper exit full detection
actuator.
G. Installation of the paper holding arm unit
1)
Install the paper holding arm unit (package part No. 6).
* If the SG-FNX3 (Inner Finisher) or the SG-BPX2 (Interface
Unit) is installed when installing the main unit, do not install
the paper holding arm unit and the paper exit full detection
actuator.
2
1
A
B
B
1
2
Summary of Contents for MF 9626
Page 89: ......
