Safety and Certifications
253561784-A
23 November 2013
4
identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a
decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.
If this equipment causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. But if advance notice isn't practical,
the Telephone Company will notify the customer as soon as possible. Also, you will be advised of your
right to file a complaint with the FCC if you believe it is necessary.
The Telephone Company may make changes to its facilities, equipment, operations or procedures that
could affect the operation of the equipment. If this happens the Telephone Company will provide
advance notice so you can make the necessary modifications to maintain uninterrupted service.
This equipment is not user serviceable. If trouble is experienced with this equipment, for repair or
warranty information, please contact Sagemcom at:
Via USA Telephone: +1 (972) 674-4100
Or Via Mail:
Sagemcom USA LLC
14651 N. Dallas Parkway
Suite 900
Dallas, TX 75254
If the equipment is causing harm to the telephone network, the Telephone Company may request that
you disconnect the equipment until the problem is resolved.
Connection to party line service is subject to state tariffs. (Contact the state public utility commission,
public service commission or corporation commission for information.)
If your home has specially wired alarm equipment connected to the telephone line, ensure the installation
of this equipment does not disable your alarm equipment. If you have questions about what will disable
alarm equipment, consult your telephone company or a qualified installer.
This equipment connects to the telephone network that can be vulnerable to electrical surges as a result
of lightning strikes and other events. Such events can be very destructive to equipment connected to
both the telephone network and to AC power sources. It is strongly recommended that a surge arrestor
be used to connect this equipment to AC power in order to reduce the possibility of damage resulting from
such events.
FCC Radiation Exposure Statement
This equipment complies with “Industry Canada RSS-102 for radiation
exposure limits set forth for an
uncontrolled environment”. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
This device produces radio frequency energy in the 2.4 GHz and 5 GHz spectrum. The antenna should
be positioned to keep a minimum distance of 23.39cm (0.77ft) from the radiating element to any nearby
person.
Issued by Sagemcom Broadband SAS
Sagemcom
250, route de l'Empereur - 92500 RUEIL MALMAISON
© Sagemcom Broadband SAS 2013
All rights reserved. Subject to availability.
Rights of modifications reserved.
