Content
ZDUE-LTE-PLUS-VII
Page 5 of 62
Installation fuse
Warning
An installation fuse in accordance with DIN VDE series 0100 (cf. CENELEC
HD384; IEC 60364) must be provided in the house installation, which is
adapted to the cable cross-section of the power supply line. The additional
short-circuit protection must have a disconnecting capacity of I > 1500A.
Transient overvoltages
Warning
The ZDUE-LTE-PLUS-VII is a device of overvoltage category III. If the
ZDUE-LTE-PLUS-VII likely to be exposed to higher transient overvoltages
than those of overvoltage category III when connected, additional protective
measures are required in the installation.
Radio
Warning
Never use the device in areas where the operation of radio equipment is
prohibited. The device contains a radio transmitter that may interfere with
the operation of medical electronic devices such as hearing aids or
pacemakers. Your doctor or the manufacturer of such devices can advise
you.
To prevent data media from being demagnetised, do not store floppy disks,
credit cards or other magnetic data media near the device.
Antenna mounting
Warning
The antenna of the ZDUE-LTE-PLUS-VII may only be installed and operated
at a minimum distance of 20 cm from people.
The antenna must be installed and operated in such a way that it does not
interact with other antennas or equipment.
When using a directional antenna, observe the legal limit for electromagnetic
fields (0 Hz to 300 GHz) in public spaces. For details see recommendations
of the EU Council 1999/519/EC of 12 July 1999.
Attention
When laying the antenna cable, pay attention to the bending radii. Failure to
observe the bending radii of the antenna cable will result in a deterioration of
the transmission and reception characteristics of the device. The minimum
bending radius must not be less than 5 times the cable diameter statically
and 15 times the cable diameter dynamically.
!
!
!
!
