7
Install...
Connect the base
Take the base and turn it over:
1
Take the telephone connecting cord, plug the phone jack into its
socket.
2
Connect the other end of the cord to the telephone wall outlet.
3
Take the power adapter assembly. Connect the power adapter
cord to the underside of the base.
4
Connect the power adapter to the wall power socket.
5
Position the base in its final location.
Handset set-up
1
Connect the power adapter of the charger to the mains socket.
2
The batteries are already inserted in the handset. To start using
your handset, simply remove the plastic tab by pulling on it firmly
in the direction of the arrow.
3
The screen will turn on.
4
An information screen presents the current language used.
5
Select the language using
and
keys. Press Valid..
6
An information screen asks you to choose the country where you
will use your telephone.
7
Select the country using
and
keys. Press Valid..
8
Place your handset on its charger and fully charge the batteries.
A beep sounds when you place the handset on the charger.
The battery charging icon
moves to inform you that charging is in
progress. The icon will stop moving when the batteries are fully charged.
Before making any connections, check the safety instructions at
the start of this guide page 4.
2
1
3
4
1
3
2
1
15 H
HD
13/12 -1- 14:05
13/12 -1- 14:05
13/12 -1- 14:05
HD
HD
GIR 253536463B D790-D790A_Sagemcom_EN.book Page 7 Jeudi, 1. août 2013 9:11 09
