Sagem Phonefax SMS 2695, User Manual

Page: 65 / 68

57
Introduction
1
2
3
5
Services
8
Options
Appendices
Telephoning
Directory
Settings
Fax
Printing
Appendix
6
Doc control
4
7
@
Internet
9
TAD
Advanced
functions
7
5$160,66,21 5(3257 &2'(
The result of each communication is given by the logs (transmission/reception) and the communication
report. In case of failure, the result is a code, whose meaning is as follows:
)
$,/85( &2'(6 2) 7+(
3
+21()
#
;
Œ606
Code 01 - You get no answer
Please call later.
Code 02 - The called number is may be incorrect, since no fax answers
Check the number of your party.
Code 03 - STOP
You pushed on STOP during the communication.
Code 04 - Invalid abbreviated number
Check the number.
Code 05 - Document feeder failure during the communication
Document jam or failure of the document feeder.
Code 07 - Failure in the operation of the remote terminal or line
Restart the communication.
Code 08 - The document you sent may not have been correctly received
Send it again and check with your the addressee.
Code 0A - Active polling
You tried an active polling while the remote terminal had no polled document.
Code 0B - Difference between the number of pages forecast at transmission and the number of
pages sent
Check the number of pages.
Code 13 - Full memory
Fax reception has become impossible. Print the received faxes and/or listen to your calls.
Code 17 - Protected access
Your machine is in protected access; someone tried to call you while he/she did not have your password.
Code 23 - Unknown mailbox number
The number of mailbox you entered is unknown by your party’s machine.
• You probably forgot to replace the gauge when you replaced
the printer ribbon.
• Remove the gauge housing cover and make sure the gauge is
present and correctly positioned.
• The ink ribbon is completely used: install a new printer ribbon
with its new gauge.
• Open the front cover and check the document path.
• Print the received faxes (and/or listen to the voice messages
received).
• Other cases • Unplug your device from the mains socket, then plug it back.
If the failure persists, call your after-sales service.
)DLOXUHV 5HPHGLHV
GAUGE EMPTY
MISSING GAUGE
CHANGE RIBBON
REMOVE DOCUMENT
MEMORY FULL
LIASSE 23690216-5A.book Page 57 Lundi, 10. décembre 2001 10:42 10