Sagem MYX5-2, User Manual

Page: 12 / 97

10
Activating your phone
Switch on the phone by pressing the key. A short display appears.
When you switch on your phone for the first time, you must configure it with
various settings that will remain by default until you choose to modify them
(depending on model).
After entering your PIN code and the date and time, make your choice for the
following settings: time zone, daylight savings, skin, wallpaper, screensaver,
ring tone, volume, vibrate and voicemail number.
If there are contacts saved in your SIM card, you are invited, if you wish, to
copy them in the phone contacts memory.
If access to the SIM card is protected, the device prompts you to enter the PIN
number:
Enter the code between 4 and 8 digits given to you when the SIM card was
issued. These digits do not appear on the screen for security reasons.
Press the OK key or the key to validate.
If your phone indicates that the SIM is missing, press the key to switch
off your phone and check that the SIM card is correctly installed.
Getting started
You are now ready to use your phone for the first time.
PIN number
This is your SIM's secret code.
Warning
If a wrong PIN number is entered three times in succession, your SIM card is blocked. You must then:
- Enter « **05* ».
- Enter the PUK (Personal Unblocking Key) code provided by your operator, and validate.
- Enter your PIN number and validate.
- Enter your PIN number again and validate.
After 5 or 10 failed attempts (depending on the type of SIM card), the SIM card is definitely locked. You must then
contact your operator or your SMC to obtain a new card.
251828826_myX-5-2_lu_en.book Page 10 Lundi, 6. décembre 2004 1:59 13