Sagem MYC3-2, User Manual

Page: 13 / 72

Activating your phone 13
Installing the SIM card and the battery
The SIM card is inserted under the phone's battery. Ensure that the phone is
switched off and the charger disconnected.
Turn to the phone’s back and push the lock button.
Remove the back cover by sliding it downwards.
Take out battery by pushing the button upwards.
Slide the SIM card, with cut corner as shown on the phone, into the card holders
with fold face down.
Place the battery by positioning first the lower part.
Replace the back cover by sliding it upwards.
Getting started
When you switch on your phone for the first time, you must configure it with various settings that will remain by default until
you choose to modify them (depending on model).
After entering your PIN code and the date and time, make your choice for the following settings: time zone, daylight savings,
skin, wallpaper, screensaver, ring tone, volume, vibrate and voicemail number.
If there are contacts saved in your SIM card, you are invited, if you wish, to copy them in the phone contacts memory.
2
1
3
4
5
1
2
3
4
5
251970899_myC3-2_lu_en.book Page 13 Mercredi, 16. mars 2005 9:22 09