Sagem MY100X, User Manual, Page: 54 / 96

54 Accessories
Setting the alarm
The alarm function is represented on the screen by the symbol .
Permanent flashing of this symbol indicates that an alarm time has
been programmed but the date and time clock has not been
initialised.
To use your phone as an alarm clock:
- Using the numbers or the scrolling arrows, set the alarm time.
Note: if you have selected the AM/PM time format (see page 46)
you also have to select it when setting alarm clock.
- Tick the box and validate by pressing OK .
The ringer is stopped by pressing any key; the alarm remains
programmed.
The alarm function remains active when the phone is switched off. It
is not affected by silent mode.
Configuring your phone with a car kit
To use your phone with a hands-free kit, see the notes supplied with
the kit.
As regards the phone, there are several options:
Programming the switch-off delay on your phone
This delay starts counting down as soon as the end of a call is
detected.
Set the phone off delay using the numbers or scrolling arrows.
Press the key to go to the next item.
Tick the box and validate by pressing OK .
Programming the alarm timing
You can be notified that your phone is ringing when you are not in
your car.
For an external warning, set the delay using the digits or scrolling
arrows.
Tick the box and validate by pressing OK .
252783943_my100X TWIN_my101X TWIN_en.book Page 54 Lundi, 18. septembre 2006 2:20 14