MF 5401
- 11 -
2 - Installation
2
Push the lower panel down until it clicks.
3
Setup the back side feed cassette stop by pushing
the "PUSH" lever (A).
Then adjust the lateral paper guides to the paper
format by pushing lever (B) located on the left
guide. Adjust the length paper guide to the paper
format by pushing lever (C).
4
Take a paper stack, pull the paper off and align it
on a flat surface.
5
Put the paper stack in the feed cassette
(200 sheets for 80 g/m² paper for instance).
6
Put the feed cassette back in its location.
Cartridge installation
1
Stand in front of the machine.
2
Push the left and right sides of the cover and pull it
at the same time towards you.
3
Unpack the new cartridge. Gently roll the cartridge
5 or 6 times to distribute the toner evenly inside the
cartridge. Thoroughly rolling the cartridge will
assure the maximum copies per cartridge.
4
Insert the cartridge in its slot by pushing it until it
clicks (last move down) as shown on the picture
below.
5
Close the cover.
PUSH
B
A
C
