Sagem MF 4690N, User Manual

Page: 49 / 132

Setting your machine
3-13
Op
eration
Se
tting y
o
ur
mac
h
ine
Getting started
Directory
M
aintenance
Safety
Contents
Installation
Date en cours : 11 May 2006
\\osn01001\be31-doc\DOC 31 - En cours\Travaux en cours\URD31\Fax\MFL V3\LU 252 547 433 A MFL_V3 _4690N GB\Setting your machine
Gb.fm
SNTP server configuration
The terminal can automatically update its date and time when connecting to an SNTP server.
Server address
M 2541 OK - SETUP / NETWORKS / SNTP SERVER / ADDRESS
Enter the name of the SNTP server, then validate with OK .
This name can be in the form of an IP address, a DNS address or a NetBIOS name.
Server port
M 2542 OK - SETUP / NETWORKS / SNTP SERVER / PORT
Enter the server port number, then validate with OK .
The port by default is port 123.
Activating the server access
M 2543 OK - SETUP / NETWORKS / SNTP SERVER / STATE
To activate the SNTP server, select
WITH
in the drop-down menu then validate with
OK
.
Time zone
M 2544 OK - SETUP / NETWORKS / SNTP SERVER / TIME ZONE
Select the time zone where the terminal is located from the drop-down list then validate
with
OK
.
If you have activated the automatic summer time management (menu 212), the TIME ZONE
setting is initialised automatically.
Summer time
M 2545 OK - SETUP / NETWORKS / SNTP SERVER / SUMMER TIME
Select the appropriate time setting in the drop-down list: winter time, summer time +1 or
summer time +2, then validate with
OK .
Remark: This menu is not displayed if the menu 212 is activated.