1-14
Installation
Date en cours : 11 juin 2001
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFK 23261436-8 37xx Sagem GB\Installation.fm
+
Make sure that the power switch is in the I (On) position.
Caution -
Plug only the power pack supplied with your machine into the port (A) by means of
the main power cord (2).
7
(/(3+21(
$1'
/$1
&211(&7,21
+
Plug end of the telephone line (4) into its jack on the fax machine (E), and the other end into
the wall telephone socket.
+
Plug end of the LAN cord (as provided by your network administrator) into port (H) of your
fax machine and the other end into your local network port dedicated to your fax machine.
3
2:(5
/,1(
&211(&7,21
$1'
6:,7&+
21
Caution -
Refer to safety procedures in the Safety Chapter.
+
Plug end of the main power cord (1) into the jack of the fax (B), and the other end in the wall
outlet
+
Set the switch (G) (depending on model) to position 1 (On).
After a few seconds, when the printer has warmed up, the date and time will appear.
8
3'$7,1*
7+(
&21680$%/(6
A chip card is delivered with the consumables. This card initializes the system which enables you
to know at any time the toner cartridges consumption level.
After installing the imaging cartridge in the printer, you need to inform the machine about their
features.
For this purpose, you must read the chip card provided with the machine, before using it.
LIASSE 23261436-8.book Page 14 Lundi, 11. juin 2001 3:33 15
