Sagem D60C, User Manual

Page: 44 / 52

40
S
ETTINGS
Select ADVANCED SET. using or .
Press Valid. .
Select SET LINE using or . Press
Valid. .
Select NETWORK TYPE using or .
Press Valid. .
A screen presents the current status (public
or private).
•
To keep the status, press Valid. .
• To change the status, press Edit .
The status is modified on the screen, press
Valid. .
To exit the menu, press the red key .
Modifying the dialling mode
Depending on the type of network your
telephone is linked to, it uses tone or pulse
dialling.
This function enables you to configure your
telephone according to the type of dialling
used by your network.
On the navigator key , press or
until the SETTINGS screen is displayed,
press OK to confirm.
Select ADVANCED SET. . Press Valid. .
Select SET LINE . Press Valid. .
Select DIAL using or . Press Valid. .
The default dialling mode is tone.
A screen displays the current status (pulse or
tone).
•
To keep the status, press Valid. .
• To modify the status, press Edit .
The status is modified on the screen, press
Valid. .
To exit the menu, press the red key .
Modifying the flash duration
(R key)
If you connect your telephone to a private
automatic branch exchange or use it in a
foreign country, you may need to modify the
flash duration in order to use your telephone
correctly with regard to the following
functionalities: outgoing 2nd call, incoming
2nd call, 3 way calling.
Contact your service provider to obtain the
correct flash duration and then modify it by
doing the following.
On the navigator key , press or
until the SETTINGS screen is displayed,
press OK to confirm.
Select ADVANCED SET. . Press Valid. .
Select SET LINE . Press Valid. .
Select FLASHING using or . Press
Valid. .
An information screen presents the current
flash duration.
•
To keep the duration, press Confirm .
• To modify the duration, press Edit .
Livre du D60_GB.book Page 40 Mercredi, 8. décembre 2004 10:01 10