800.925.7243 f. 214.631.2323 [email protected] www.sageworld.com
This step can happen at anytime up to the first time you want to scan a badge at a show although internet access is
required. If you are on a device that may not have Internet access at the show, be sure to go into ShowLink on the device
and select the show while you have an Internet connection. Once a show is selected, you can scan without an internet
connection and then re-connect to the Internet after the show to upload your leads.
iOS Show Setup
1. Open ShowLink on your iOS device and press the settings icon.
2. Press the ‘Select Show’ button
3. Select the show that you are attending
4. Your device is now ready to scan at this show.
Windows Show Setup
1. Open ShowLink on your computer select FILE | SELECT SHOW
2. Select the show that you are attending
3. Your device is now ready to scan at this show.
STEP 7 | Testing your scanner & Setup
STEP 6 | Show Setup on your iOS Device or Windows computer
NOTE | Be sure to setup ShowLink PRIOR to arriving. For support, call 800.925.7243
This step can will confirm that your scanner and software are connected properly and allow you to get
familiar with your new ShowLink software and scanner.
iOS Show Setup
1. Start ShowLink
2. Tap the Settings icon
3. Select the “ShowLink Test Show”
3. Tap “Back” to return to the scan screen.
4. Scan the test badges below with your scanner or internal camera (if available). You should see the
information populate your screen.
5. If all of the badge information shows up, you are ready to go for your first show.
6. Be sure to switch to the show you are are attending and also select your scan items in sagemember.com
Windows Show Setup
1. Open ShowLink on your computer select FILE | SELECT SHOW
2. Tap “Back” to return to the scan screen.
3. Scan the test badges below. You should see the information populate your screen
4. If all of the badge information shows up, you are ready to go for your first show.
5. Be sure to switch to the show you are are attending and also select your scan items in sagemember.com
All of the information that is needed to setup a show, choosing your scan items, etc. is maintained in SAGEmember.com. Prior
to attending the show, be sure to visit SAGEmember.com and activate and setup the show. This is also where all of your leads
are stored along with all reporting after the show.
STEP 5 | Show setup in SAGEmember.com (prior to attending the show)
Fred Smith
Jane Smith
Joe Johnson