background image

13

EN

REPLACING THE WATER FILTER

1.  Remove old water fi lter and separate the 

adapter from the fi lter cartridge. Discard old 

cartridge. 

            

2.  Soak the new fi lter in cold water for 5 minutes.

3.  Attach water fi lter to adapter. Insert the 

assembled water fi lter and adapter into the 

water tank.

   

  

4.  Fill the water tank with cold water to the 

indicated MAX marking.

5.  Navigate the SETTINGS menu and set YES to 

the NEW FILTER.

NEW FILTER

Care & 

Cleaning

Always turn the coff ee machine off  and remove the 

plug from the power outlet before cleaning.

CLEANING THE COFFEE BASKET 

AND MESH BASKET FILTER

Remove the coff ee basket. Discard any ground 

coff ee and fi lter paper. The coff ee basket and 

mesh basket fi lter can be rinsed under running 

water. Ensure the fi ne holes of the mesh basket 

fi lter are clear. For a deeper clean, wash the coff ee 

basket and mesh basket fi lter in warm, soapy water 

with a soft bristled brush.

CAUTION

The coff ee basket, mesh basket or paper fi lter 

may still be very hot after brewing. Use caution and 

allow to cool before removing.

CLEANING THE CARAFE

After each use, empty the carafe. Do not let brewed 

coff ee stand overnight as this can cause the carafe 

to stain. Rinse the carafe and carafe lid under warm 

running water. For a deeper clean, we recommend 

regularly washing the carafe in warm, soapy water 

using a soft bristled brush. Do not use abrasive 

cleansers, pads or cloths which can scratch the 

surface. Rinse and dry thoroughly.

CLEANING THE SHOWERHEAD

Simply wipe down the showerhead area 

periodically. However, if a more thorough clean 

is required, the Showerhead can be removed by 

unlocking the Showerhead Ring. Rotate clockwise 

then remove the Showerhead for cleaning. Once 

complete, reinstall the Showerhead.

CLEANING THE OUTER HOUSING

The outer housing and LCD screen can be 

cleaned with a soft, damp cloth. Apply cleaner to 

the cloth and not the LCD surface. Polish with a 

soft, dry cloth. Cleaning and drying with dry paper 

towels or abrasive cloths and cleaners may scratch 

the surface.

REPLACING THE WATER FILTER 

The provided water fi lter helps prevent scale 

build‑up in and on many of the inner functioning 

components. Replacing the water fi lter when 

indicated on the screen or after 3 months will 

reduce the need to descale.

Summary of Contents for Precision Brewer SDC400













Reviews: