8
Step 5:
Select Your Grind Size
For espresso, we recommend starting with grind
size setting 15 and rotating the Hopper (to adjust
the Grind Size Collar) either coarser or finer.
NOTE
If the Grind Size Collar is tight, run the grinder
by pressing the START / CANCEL button
while turning the Hopper. This will release
coffee grounds caught between the burrs.
GRINDING INTO A GRINDS
CONTAINER OR COFFEE FILTER
Step 1:
Remove cradle by sliding out from under the
grind outlet.
PULL
Place your container or coffee filter directly under
grind outlet.
Step 2:
Select the required amount of ground coffee
by rotating the GRIND TIME dial.
Step 3:
Select Your Grind Size
Rotate the Hopper to adjust the Grind Size Collar
until it reaches the required brewing method range.
FEATURES OF YOUR SAGE
DOSE CONTROL
™
PRO
Pause Function
You can pause the grinder during
operation, allowing you to collapse or
settle the coffee in the Portafilter.
• Press the START / CANCEL button to start
the grinding operation.
• During grinding, press the START / CANCEL
button to pause the grinding operation for
up to 10 seconds.
The START / CANCEL button will slowly flash
while paused.
• Press START / CANCEL again within this
time to resume grinding the remaining dose.
Or press and hold the START / CANCEL
button for 1 second to cancel.
Manual
Grinding manually allows you to have complete
control over how much coffee is dispensed.
• Press and hold the START / CANCEL button
to grind for as long as you require.
• Release START / CANCEL button to
stop grinding.
OPERATING YOUR NEW APPLIANCE