Sage Barista Express Impress SES876, Quick Manual

Page: 25 / 232

EN
25
PROBLEM POSSIBLE CAUSES WHAT TO DO
Dose level is
not updating
•
Machine in ‘Manual’ mode. Press the MANUAL DOSE dial to return to auto
mode. Refer to ‘Dosing Modes’ under Functions.
Grinder does not
grind all beans
•
Not enough beans in hopper. Refill hopper or use ‘Manual’ mode.
Severe overdose
•
Single basket used in double
filter mode.
Select the correct filter size.
Severe underdose
•
Double basket used in single
filter mode.
Select the correct filter size for your next dose, then
‘Reset Auto Dose Time’ under Functions.
Underdosed
•
Grind adjusted to finer grind. Use ‘A Bit More’ to reach the ideal dose.
Coffee is not
running from
the portafilter
•
The coffee grind is too fine. Refer to ‘Setting the Grind Size’ and ‘Extraction
Guide’ under Functions.
•
Water tank is empty. Fill water tank.
Coffee runs out
too quickly
•
The coffee grind is too coarse. Refer to ‘Setting the Grind Size’ and ‘Extraction
Guide’ under Functions.
Coffee runs out
too slow
•
The coffee grind is too fine. Refer to ‘Setting the Grind Size’ and ‘Extraction
Guide’ under Functions.
No crema
•
Coffee beans are stale. Use freshly roasted coffee beans with a ‘Roasted
On’ date and consume between 5-20 days after
that date.
Coffee is too cold
•
Cups are cold and causing
temperature of extraction
to reduce.
Pre-heat cups.
•
Milk not heated enough
(if making milk-based drink).
When the base of the jug becomes hot to touch this
is when the milk is heated at the correct temperature.
Refer to ‘Texturing Milk’ under Functions.
No steam
•
Steam wand is blocked. Use the pin on the end of the provided cleaning tool.
If steam wand remains blocked, refer to ‘Cleaning
the Steam Wand’ under Care & Cleaning for
detailed cleaning process.
•
Water tank is empty. Fill water tank.
Water coming out of
steam wand
•
Machine is heating up. Purge steam wand before texturing milk. Refer to
‘Texturing Milk’ under Functions.