Safran LRF 3013, Manual

Page: 28 / 36

LRF 3013 Integrator Manual
Document number: TML 913655 ver A
Public: 13.03.2017
Confidential & Proprietary

Safran Vectronix AG
– All rights reserved
page: 28/36
6.2.3 Software versions, hardware configuration and serial number
This command is used to read out the following system information:

Product type

Article number

Serial number

uC Firmware version

DSP firmware version

HW configuration
Each field ends with a carriage return, that is: in a terminal program each field will be displayed on a
separate line. Future FW releases may add new fields/lines to the command output.
Command format:
Table 2
Software versions, hardware configuration and serial number
Command Input
Input Description
>Iv1<CR> Read out of SW versions, HW configuration and
serial number.
>Iv<CR>
Output
Field/Line Value Description
Product Prod: LRF-MB-ModC -
910994<CR> LRF product type with PLM number
Article number Article Num.: nn<CR> Article number:

“nn” is a decimal number with up to ten
digits (0 ≤ nn ≤ 2
32
-1)
Serial number Serial Num.: nn<CR> Serial number:

“nn” is a decimal number with up to ten
digits (0 ≤ nn ≤ 2
32
-1)
uC FW version uC FW: vWW.XX.YYkZZ
- Mmm dd yyyy<CR> Version of microcontroller firmware with compiling
date:

“WW”, “XX”, “YY”, “k” and “ZZ” indicate the
firmware version as defined in RD1

“Mmm”, “dd”, “yyyy” is the compiling date
DSP FW version DSP FW: X.YY -
dd/mm/yy< CR> Version of DSP firmware with compiling date:

“X.YY” is the firmware version

“dd/mm/yy” is the compiling date
Detected HW HW: xx-yy-ww-zz<CR> Detected HW:

“xx” : LRF-MB-ModC HW version

“yy” : ‘Extension’ board

“ww” : Transmitter board

“zz” : Receiver board
See PD3 for details about exact values.