5.3.
Point Temperature
1.
Press the SET button to open the main menú
2.
Press the left/right button to select the
option
3.
Press the SET button to enter the Point Temperature menú
4.
Press the up/down button to select the desired point.
a.
Press the SET button to turn on the point and enter
the thermal imaging page.
Press the left/right/up/down button to move the point.
Press the SET button to confirm and read the
temperatura of the current point.
b.
Press the SET button to turn off the point. Press the
back button to exit.
5.4.
Image Mode
1.
Press the SET button to open the main menú
2.
Press the left/right button to select the
option
3.
Press the SET button to enter the Image Mode menú
4.
Press the up/down button to select the desired mode from
Thermal (infrared image), Digital (visual light image), and
Fusion (image blending)
5.
Press the SET button to apply the current mode.
6.
Plress the back button to exit.
NOTE: If Fusion is selected, users can press the left/right button to select the desired
blending ratio from 0% (pure visual light image), 25%, 50%, 75% and 100% (pure
infrared image) under the thermal imaging page.