6.2.
Image Viewing
1.
Press the replay button to enter the gallery interface
2.
Use the up/down/left/right button to select the desired image
3.
Press the SET button to view the image in full screen mode
4.
Press the SET button in full screen mode to delete the image or view
its information
NOTE: Do not remove or insert the SD card in viewing images
6.3.
Temperature Compensation
To adapt to different environments and places, manual temperatura
compensation is available. Fort he specific settings method, please refer to
5.5.5. measurements.
6.4.
Flashlight/Warning Light
Press and hold the flashlight button for 3 seconds to tur on/off the LED
light.
When the temperatura alert i son ad the measured temperatura excedes
the set temperautre range, the LED light Will flash.
NOTE: When the flashlight i son, please do not point the eyes of people or animals.
6.5.
USB Communication and Image Projection
1.
Download and install the PC software (refer to:
https://athena-visiotech.s3-eu-west-
1.amazonaws.com/nx9xDHEBlrFzs_pSrxzY/
2.
Connect the USB cable to the PC
3.
Set the USB mode to USB disk to browse pictures and
analyze data through the PC software, set the USB mode to
USB camera to realice real-time image projection through
the PC software
4.
Regardin the usage of the PC software, retrieve the
Software User Manual from the Hlp option of the operation
interface.
NOTE: Please do not unplug the USB cable during image projection; after use,
placer close the PC software before unplugging the USB cable.
6.6.
SD Card
This device supports Micro SD card (TF card) to store images. To
avoid affecting the operating speed of the device, please copy the
backbup data regularly and clean up the SD card in time. To avoid
causing abnormal data on the SD card, do not inserto r remove the
SD card repeatedly. Try to remove and insert the SD card when the
device is turned off.
6.7.
Charging
Please use a safety-certified 5V/1A or 5V/2A power adapter for
charging. Do not turn off the producto easily during charging. If
shutdown or restart is needed, please unplug the Type-C power
cord and disconnect the power supply first
