V1.0 2018 Copyright SAFEWAZE™
Page 11
Unless explicitly stated otherwise, the maximum allowable free fall distance for lanyards must not
exceed 6’. Class A SRLs must arrest falls within 24”; Class B SRLs must arrest falls within 54”.
Harnesses and connectors selected must be compliant with manufacturer’s instructions, and must be
of compatible size and configuration. Snap hooks, carabiners, and other connectors must be
selected and applied in a compatible fashion. All risk of disengagement must be eliminated. All snap
hooks and carabiners must be self-locking and self-closing, and must never be connected to each
other.
A pre-planned rescue procedure is required in the event a fall occurs. The rescue plan must be
project-specific. The rescue plan must allow for employees to rescue themselves, or provide an
alternative means for their prompt rescue. Store rescue equipment in an easily accessible and clearly
marked area.
Training of Authorized Persons to correctly erect, inspect, disassemble, maintain, store, and use
equipment must be provided by a Competent Person. Training must include the ability to recognize
fall hazards, minimize the likelihood of fall hazards, and the correct use of personal fall arrest
systems.
NEVER use fall protection equipment of any kind to hang, lift, support, or hoist tools or equipment,
unless explicitly certified for such use.
Equipment subjected to forces of fall arrest must immediately be removed from use.
Age, fitness, and health conditions can seriously affect the worker should a fall occur. Consult a
doctor if there is any reason to doubt a user’s ability to withstand and safely absorb fall arrest forces
or perform set-up of equipment. Pregnant women and minors must not use this equipment.
Physical harm may still occur even if fall safety equipment functions correctly. Sustained post-fall
suspension may result in serious injury or death. Use trauma relief straps to reduce the effects of
suspension trauma.
Labels
J
F
M
A
M
J
J
A
S
O
N
D
INSPECTION
322 Industrial Court, Concord, NC 28025
(704) 262-7893 | www.safewaze.com
FS-EX325
12 IN DECK ANCHOR for WOOD, CONCRETE, and STEEL
Must follow all manufacturer’s instructions included with the equipment at the time of shipment.
Meets: OSHA 1910 & OSHA 1926 Subpart M; ANZI Z359.1 & ANSI A10.32
01165R1
MATERIALS: Galvanized steel
WEIGHT CAPACITY RANGE: 130-310 lbs, or up to 420 lbs if used with equipment explicity certified for such use.
Maximum 1 connection per anchor.
Only make compatible connections.
Refer to instructions for proper installation and connection methods.
All PFAS equipment must be selected and deemed compatible with with this anchor by a Competent Person.
Avoid contact with hazards, including (but not limited to) heat chemicals, electricity, and sharp or abrasive edges and surfaces.
Product lifetime is indefinite, so long as the equipment passes pre-use and Competent Person inspections.
This unit must be inspected prior to each use.
A Competent Person must complete a formal inspection of this unit every 6 mos.
If equipment fails inspection, IMMEDIATELY REMOVE THE UNIT FROM SERVICE.
Do not remove label.
MFG. DATE
XX/XX
J
F
M
A
M
J
J
A
S
O
N
D
INSPECTION
322 Industrial Court, Concord, NC 28025
(704) 262-7893 | www.safewaze.com
FS-EX326
18 IN DECK ANCHOR for WOOD, CONCRETE, and STEEL
Must follow all manufacturer’s instructions included with the equipment at the time of shipment.
Meets: OSHA 1910 & OSHA 1926 Subpart M; ANZI Z359.1 & ANSI A10.32
01165R2
MATERIALS: Galvanized steel
WEIGHT CAPACITY RANGE: 130-310 lbs, or up to 420 lbs if used with equipment explicity certified for such use.
Maximum 1 connection per anchor.
Only make compatible connections.
Refer to instructions for proper installation and connection methods.
All PFAS equipment must be selected and deemed compatible with with this anchor by a Competent Person.
Avoid contact with hazards, including (but not limited to) heat chemicals, electricity, and sharp or abrasive edges and surfaces.
Product lifetime is indefinite, so long as the equipment passes pre-use and Competent Person inspections.
This unit must be inspected prior to each use.
A Competent Person must complete a formal inspection of this unit every 6 mos.
If equipment fails inspection, IMMEDIATELY REMOVE THE UNIT FROM SERVICE.
Do not remove label.
MFG. DATE
XX/XX