Valve programming
Step Action
Selections
Next Action
1
Press SET &
To Set “P” setting for filters (hold for 3-5 seconds)
2
Press SET &
Press again
(hold for 3-5 seconds)
Press SET
3
Set “P” setting
Arrow up or down to the Program (P) setting desired:
P = 8 for carbon or sediment (10 mins. backwash; 6 mins. rinse)
Press SET
P = 9 for Iron, Sulfur, Neutralizer (14 mins. backwash; 8 mins. rinse)
Press SET
4
99
Display shows “99” (does not apply)
Press SET
5
dP
Display shows dP (does not apply)
Press SET
6
12 Hr
Do nothing and . . .
Press SET
7
Back at time
Now, set regen time:
8
Press set &
Hour is blinking. Arrow up or down to hour desired. (12 AM typical.) Press SET
9
Minutes blinking. Arrow up or down to minutes desired
Press SET
10
Now set regen days. (Filters typically regen every 3 to 5 days)
Press SET
Note
Press and release to regen tonight
Press and hold to regen immediately. To advance cycles press
Back to time.
Note: Clock for the filter valve is a 12 hour clock. Note arrows on the face plate. Arrow pointing to “time” is AM. Arrow pointing to “PM” is PM.
Start-Up
With the valve’s inlet and outlet closed, initiate a manual regeneration and follow these directions:
1.
Press
together and hold buttons for 3-5 seconds to go into an immediate regen.
2.
Let the valve advance to BACKWASH.
3.
Open valve’s inlet slowly 1/3 to fill mineral tank.
4.
Allow air to escape (listen until spurting stops).
5.
When water flows from drain, open inlet valve fully.
6.
Make sure drain line is not restricted. Continue backwash until water runs clear.
7.
Press arrow
DOWN
to advance to service.
Finally . . .
1.
Open the valve’s outlet to supply water to the house.
2.
Open a faucet to see if water runs clear.
3.
Shut off faucet.
Customer orientation
It is important to provide customers with an initial orientation. This should include how to reset the clock and
how the backwashing process works.
Caution
Do not fill swimming pools with water from an Iron / sulfur filter. This will exceed the capacity of the system.
Warranty
Signature Series Safety Zone Water Systems come with a limited warranty. Five years for valves, and ten years
for tanks. Activated carbon and filter media come with a quality guarantee only. See warranty card or go to
