SV-CLCD56BA/70BA Quick Installation Guide
June 2010
SV-CLCD56BA_70BA QIG Ver.1.1d.doc
3
Typical Installation
SV-LCD56BA/70BA Monitor
1. Select a mounting surface for the monitor, which can
be mounted overhead or elsewhere in the vehicle
cabin (including on the floor or console).
The mounting surface should:
y
Be level, waterproof, ventilated adequately, and
capable of supporting the weight of the monitor and
mounting bracket
y
Not be close to a vehicle speaker (to prevent
interference from the speaker’s magnetic field)
y
Not be extremely hot or humid
2. Affix the monitor bracket to the mounting surface with
the supplied screws, the pre-applied high-bond
adhesive, or both.
Ï
Installing the Monitor Bracket
3. Position the monitor in the monitor mounting bracket,
adjust the angle as necessary, and tighten the handle
screw.
Ï
Installing the Monitor in the Bracket
SV-625B Camera
1. Select an appropriate mounting location for the
camera, which should be mounted on a solid, flat
surface at the highest possible point on the vehicle.
2. With the provided hardware, affix the camera
mounting bracket to the mounting surface, and secure
the camera and sun visor in the bracket.
Ï
Installing the Camera
3. Connect the provided 65-foot extension cable. Align
the arrows on both cable connectors, and then tighten
securely.
This connection must be made tightly to
ensure water resistance.
Ï
Connecting the Camera Pigtail to the Extension Cable
