5
CAUTION
Make sure the power supply voltage is correct before using the camera.
Do not drop the camera or subject it to physical shock.
Do not touch sensor modules with fingers. If cleaning is necessary, use
clean cloth with a bit of ethanol and wipe it gently. If the camera will not
be used for an extended period, please replace the lens cap to protect the
sensor from dirt.
Do not aim the camera at the sun or extra bright places. Blooming or
smearing may occur otherwise (which is not a malfunction), and affect the
endurance of sensor at the same time.
The sensor may be burned out by a laser beam, so when any laser e
quipment is in using, make sure that the surface of sensor will not be
exposed to the laser beam.
Do not place the camera in extremely hot, cold (the operating
temperature shall be -30°C ~+60°C, or -40°C ~ +60°C if the camera model
has an “H” in its suffix), dusty or damp locations, and do not expose it to
high electromagnetic radiation.
