14
Feed the plugless network cable (7) through the lock nut (6),
waterproof rubber gasket (5) (the rubber gasket inset ridge must face
the waterproof endcap), and the waterproof endcap (4) in order.
Crimp an RJ-45 network plug (3) onto the end of the cable, taking care
to insert the twisted pairs of wires in correct order.
Place the O-type gasket (2) onto the end of the camera’s network
interface socket (1).
Insert the network plug (3) into the camera’s network interface socket (1).
Insert the waterproof rubber gasket (5) into the waterproof endcap (4),
and secure the lock nut (6) with the waterproof endcap (4).
Align the snap on the waterproof endcap (4) with the notch on
the camera’s network interface socket (1), and then secure the
waterproof endcap (4) to the camera’s network interface socket (1)
to finish the installation.
1.
2.
3.
4.
5.
6.