background image

Safety   Track      249   Main   Street      Belleville,   MI   48111      888-­‐286-­‐9829   

   

14   

12-­‐28v   ‘Alarm’   Input   

   

   

   

The   Alarm   Input   setting   is   for   DVRs   that   have   an   external   monitor.   This   option   is   to   tell   the   OSD   to   train   
to   one   camera   when   a   voltage   input   is   received.   This   option   can   be   used   for   backup   cameras,   blind   spot   
cameras   when   turn   signals   are   used,   to   watch   a   tow   truck   hook   a   vehicle   when   the   PTO   is   engaged,   etc.   

Example   –   Backup   Camera:   The   Channel   2   camera   is   affixed   to   the   license   plate.   The   Alarm   1   wire   on   the   
Alarm   Input   harness   is   tapped   into   the   reverse   light   and   the   channel   on   the   Alarm   Setting   is   set   to   Ch2.   
When   the   vehicle   is   placed   in   reverse,   the   OSD   will   automatically   train   to   Channel   2’s   camera   and   display   
it   full   screen.   Once   the   vehicle   is   taken   out   of   reverse,   the   OSD   will   revert   to   its   default   setting   (quad   
display,   channel   1,   etc.)   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

   

Default   OSD   

Display   

   

Alarm   Input   OSD   

Display   

   

Summary of Contents for UCIT


















Reviews: