27
3. If your Safety Seat was ordered with your
Shower Deck bathtub, the screw holes will be
pre-drilled in the bathtub at the factory (
skip
to #5
). If your seat was ordered after your
Shower Deck, the holes will need to be
marked out and drilled with a 9/64” drill bit
(not included). Set the seat on the bathtub
as per illustration, right. Make sure the
hinges are both resting on the ledge in the
bathtub, and that the seat bumper is resting
completely on the bathtub front ledge.
4. Mark out the 8 holes through the hinges and onto the bathtub. Use a thin awl, scribe, or pencil
lead. Remove the seat and drill the 8 holes using a 9/64” drill bit (not included).
5 Set the seat in place and secure to bathtub
using the provided hardware. Be sure to in-
clude the clear plastic trim cap retainers.
Once all 8 stainless screws and trim cap re-
tainers are tight, snap on the white plastic
trim caps for a finished appearance.
Positioning Shower Deck Safety Seat
Seat Hinges Rest on “Ledge” Inside Bathtub
Securing Safety Seat To Bathtub Using Included Hardware
Ensure seat bumper
lands on bathtub when
seat is lowered.
