11
1. If your Safety Bath So-Lo is replacing an old bathtub, remove old bathtub first. Observe basic
safety precautions, and wear a dust mask during this step. Thoroughly clean up the work area
to remove all debris, dirt, nails, etc. Thoroughly inspect the old tap & faucet assembly if you in-
tend to re-use it. Safety Bath highly recommends replacing all plumbing components to ensure
an aesthetically pleasing finished product.
2. Refer to the illustrations below for rough opening dimensions.
Remember:
small variances in
manufacturing dimensions may occur.
Do not
proceed with framing until you have examined
and measured the bathtub to ensure a correct fit.
3. Install 1x3 or 1x4 dimensional lumber to provide support along the edges of the bathtub, and
2x4 lumber along the back of the shower deck on Heated Shower Deck models. See illustrations
on following page.
Safety Bath So-Lo Overall Outside Dimensions (SAE)
Safety Bath So-Lo With Shower Deck Overall Outside Dimensions (SAE)
Safety Bath So-Lo Overall Outside Dimensions (Metric)
Safety Bath So-Lo With Shower Deck Overall Outside Dimensions (Metric)
