Safety 1st Under Crib Smart Light, Quick Start Manual

Page: 2 / 6

If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning this equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Changes or modifications not expressively approved by Dorel
Juvenile Group can void your authority to operate this equipment under Federal
Communications Commission’s rules.
Use of other accessories may not ensure compliance with the FCC exposure
guidelines.
CAUTION:
This equipment complies with FCC/IC RSS-102 radiation exposure limits
set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 8 in. (20 cm) between the radiator and your body.
IC Information
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using
an antenna of a type and maximum (or lesser) gain approved for the transmitter by
Industry Canada. To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communication. This Class B
digital apparatus complies with Canadian ICES-005.
Warranty
Dorel Juvenile Group warrants this product against defective materials or
workmanship. For more information or to make a claim, visit www.safety1st.com/
warranty.
Apple, the Apple logo, and iPhone are trademarks of Apple Inc., registered in the U.S.
and other countries. App Store is a service mark of Apple Inc.
Google, Android, Google Play and Google Home are trademarks of Google LLC.
Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its
affiliates. All other trademarks are the property of their respective owners.
©2022 Dorel Juvenile Group, Inc. Safety 1st™ and the Safety 1st logo and design
are trademarks of Dorel Juvenile Group, Inc. (800) 544-1108 www.safety1st.com.
Styles and colors may vary. Los estilos y los colores pueden variar. Les styles et
les couleurs peuvent varier. Made in CHINA. Fabriqué en CHINE. Hecho en CHINA.
Distributed by (distribuido por) (distribrué par) Dorel Juvenile Group, Inc., 2525 State
St., Columbus, IN 47201-7494. Dorel Juvenile Canada, 2233 Argentia Road, Suite
110, Mississauga, ON L5N 2X7. Importado y Distribuido en Chile por: Comercial
e Industrial Silfa S.A. - San Ignacio 0201 / Parque Industrial Portezuelo Quilicura,
Santiago Chile. Fono (562) 2339 9000. En Perú por: Comexa S.A. - Los Libertadores
455 – San Isidro, Lima – Perú. Fono (511) 4469014. En Centro América, Caribe y
Ecuador por: Best Brands Group S.A. – Av. Balboa, Bay Mall Plaza, Planta Baja, local
9, Panamá. - Fono: (507) 300 2884. En Colombia por: Baby Universe S.A.S. - Vía 40
No. 77-29, Barranquilla, Colombia - Fono: (575) 353 1110 Importador: DJGM, S.A.
DE C.V. Gabriel Mancera No. 1041 Col. Del Valle, Benito Juárez C.P. 03100 México,
Ciudad de México R.F.C. DJG140305GN9 Tel. (55) 67199202
08/11/22 4358-8170A
THE USER SHOULD NOT ATTEMPT TO SERVICE OR REPAIR
THE CRIB LIGHT. ALL SERVICING SHOULD BE REFERRED TO
CONSUMER CARE
.
It is essential to check reception regularly. Crib light uses encrypted transmission
over FCC managed frequencies.
Always remember to password protect your
Wi-Fi router.
IMPORTANT SAFETY INSTRUCTIONS
• HEAT: The crib light should be situated away from heat sources such as
radiators, heat registers, stoves, or other appliances that produce heat. Also keep
these components out of direct sunlight.
• POWER CORD PROTECTION: The power supply cord should be routed so that
it is not likely to be walked on or pinched by items placed upon or against it. Pay
particular attention to the cord at the plug, convenience receptacle, and at the
point it exits from the crib light.
FCC/IC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However there is no
guarantee that interference will not occur in a particular installation.
Disposal
Keep product away from hot, humid areas or strong sunlight, and do not let it get
wet.
Every effort has been made to ensure high standards of reliability of your product.
However, if something does go wrong, please do not try to repair it yourself.
Contact Consumer Care for assistance.
At the end of the product life cycle,
you should not dispose of this product with
normal household waste. Take this product to a collection point for the recycling
of electrical and electronic equipment.
Some of the product materials can be reused if you take them to a recycling point.
By reusing some parts or raw materials from used products you make an
important contribution to the protection of the environment. Please contact your
recycling center in case you need more information on the collection points in your
area.
Removal
To remove the crib light and control unit, carefully slide a piece of fishing line or
dental floss between the crib, crib light, and control unit.
Then, in a sawing motion, cut the adhesive away from the crib. Rub and roll the
remaining adhesive off of the crib, crib light, and control unit.
Note: You may also use the heat from a hair dryer on the lowest setting to help
soften the adhesive to aid in its removal from the crib. Before doing so, remove all
bedding and the mattress from the crib.
• Adult installation is required. Keep small parts away
from children when installing. Exercise care when
unpacking the product.
• This product is intended to be attached
UNDER
the
crib, where it is least likely to be accessed by the
child when placed inside the crib.
• To prevent possible injury by entanglement, KEEP
CHILDREN away from cords.
• DO NOT
remove cable from crib light – it is not
detachable.
• These products are not toys. DO NOT allow children
to play with them. DO NOT use product if damaged or
broken.
WARNING:
CAUTION:
Product FAQs
Is it safe to install on a crib or bed?
•
Yes. The under crib light is designed to be securely mounted with
high-strength double-sided adhesive. Use included wire clips to fasten
the light and cable off the ground.
How far away will motion be detected using the sensor?
•
In the app, you can select from three ranges; near, medium or far.
Near Medium Far
2’6” (0.8m) 10’ (3m) 15’ (6m)
Can I pair my device with more than one account?
•
Sharing access to your device with other caregivers is easy. Access the
device settings screen, select “sharing & users” then tap “add a new
user” and complete the information.
•
To pair the device with a new account owner, you must factory reset the
device by holding the power button for 10 seconds.
Power Button Functionality
With the unit ON and motion sensing disabled, each button
press advances through the following modes:
1) Lights OFF
2) Lights ON with motion sensing enabled
3) Lights ON with motion sensing disabled (always on)
4) Back to 1)