Thread Harness Strap
(1) With sewn end of
the harness strap loop
facing the buckle
,
thread
the harness strap down
through lower harness
guide on left side of shell.
(2)
Pull across bottom of
shell and up through lower
harness guide on right
side of shell.
Harness tightening strap MUST lay between shell
and harness strap as shown.
Take both ends of the
harness strap and make
them even in length.
The sewn ends of the
harness strap loops MUST
face each other as shown.
C. Basic Use
23
24
C-6
Installing Harness System
Install Buckle
Insert the buckle’s metal
retainer through the
desired slot.
Make sure that the buckle
is
facing out.
Pull buckle’s metal
retainer
completely
through pad and shell
.
Check Buckle
Pull up on buckle to make
sure it is secured.
The buckle must not pull
out.
Failure to place buckle’s metal retainer
completely through pad and shell can result
in serious injury or death.
1.
a.
b.
continued on next page.
(3)
Thread left harness strap
through the
back
of the left
buckle tongue. Repeat for right
harness strap.
(4)
Thread the chest clip from
front to back as shown.
(5)
Push harness ends through
upper harness slots at the
same height.
DO NOT twist harness straps.
b.
5
4
4
3
2.
1
2
a.
