C. Basic Use
21
22
Harness system
MUST
be removed to use this
child restraint as a Belt-Positioning Booster.
Remove Harness
Straps from Splitter
Plate
Fully loosen harness
straps. Locate splitter plate
on the back of the seat
and unfasten the harness
straps.
1.
Secure Splitter Plate
Pull out on harness
tightening strap so that
the splitter plate is flush
against the bottom of the
shell.
2.
Remove Harness
Straps
(1)
Pull harness through
the slots from the front.
(2)
Unthread harness from
the chest clip.
(3)
Do not unbuckle the
buckle.
Unthread harness
from the buckle tongues.
(4)
Pull harness out of shell.
3.
C-5
Removing Harness System
1
2
3
4
Remove Buckle
Turn the child restraint
over and locate buckle’s
metal retainer on bottom
of shell.
Rotate metal retainer,
then insert retainer up
through the shell and
pad.
From the top, pull buckle
free from shell and pad.
4.
5.
Store the harness straps, chest clip, buckle
tongues and buckle for future use.
