xx
E. Installing Rear Facing
Check Belt Tightness
Grasp the base
at the belt
path with one hand.
Push
and pull the child restraint
from side to side, forward
and back. The child restraint
should not move more than 1
in. (2.5 cm).
NOTE:
If it moves more than
1 in. (2.5 cm), try reinstalling
the child restraint or try
another seating location.
7.
44
43
Attach Carrier to Base
Secure child in child
restraint
.
Align the notches in the
front of carrier with the
base lock bar.
Push down firmly to lock.
You will hear a “click”
when it is locked. Pull up
on carrier to make sure it
is locked.
Carry handle MUST be
upright AND locked
when installed in the
vehicle.
8.
Failure to securely attach carrier to base
can result in serious injury or death.
Check Angle
Indicator
Check the angle
indicator while parked
on level ground. The ball
should be in the zone
that matches the weight
of your child.
Repeat steps 4-8 if
not reclined correctly
and adjust base if
needed
(see section
C-8).
You may need to place
a large rolled towel or
foam pool noodles under
the front of the base to
achieve correct recline
angle.
Check often to be sure
padding is still in place
and the belt is tight.
(1.8-4.9 kg)
4-11 lb
11-35 lb
(4.9-15.9 kg)
9.
continued on next page.
