xx
41
42
E. Installing Rear Facing
E-2 Installing Base with Lower Anchor
Belt
continued on next page.
Place Base in Vehicle
Rear Facing
Center the base between
the vehicle anchors in the
chosen seating position.
1.
Remove Lower
Anchor from Storage
2.
NOTE:
Review your vehicle owner’s manual for lower
anchor belt use.
Thread Lower Anchor
Belt
Thread lower anchor hooks
through belt path openings.
3.
Attach Lower Anchor
Hooks to Vehicle
Anchors
4.
Tighten Belt
Push base down
FIRMLY
on the base and towards
the vehicle seat while
pulling up on the belt to
tighten.
5.
Tuck Loose End of
Belt
You
MUST
tuck loose end
of the lower anchor belt
back through the belt
path hole.
6.
Do not use lower anchor along with the vehicle
lap or lap/shoulder belt.
Check lower anchor belt before each use. Use
only if the belt can be tightened properly and
securely.
Do not fasten multiple lower anchor hooks on the
same lower anchor bar in the vehicle.
Failure to follow these warnings can result in
serious injury or death.