Flat Surface Mounting
1. Determine an optimal monitor
placement, keeping the monitor
and power cord at least 3 ft
(0.9 m) away from crib. The
monitor should be placed on a
fl at surface, such as a chest of
drawers, a desk, or a shelf.
2. Before proceeding to the next step. Ensure that the viewing angle
is to your liking by verifying the app. Rotate and tilt the monitor
as needed.
3. Follow
Step 9 a-d of Wall Mounting: WALL CLIPS.
Use the
included wall clips to secure the cord at least 3 ft (0.9 m) away
from the crib. This will help reduce the chance of the monitor
slipping, sliding, rotating or falling over.
7
8
6. Locate the hole underneath the base of the
monitor and place it on the wall mount.
7. Applying light pressure to the base, slide the
monitor
DOWN
on the wall mount until it
clicks fi rmly into place.
DO NOT
pull on the
monitor head. Rotate and tilt the monitor to
ensure it is fully attached to the wall mount.
a. To remove the monitor from the wall, push up on the base until
it releases from the mount.
NEVER
leave the monitor hanging
on the wall mount without clicking in place.
8. Before proceeding to the next step. Ensure that the viewing angle
is to your liking by verifying the app. Rotate and tilt the monitor as
needed.
9.
WALL CLIPS
: Use the included wall clips to secure the cord at least
3 ft (0.9 m) away from the crib:
a. Repeat steps 3 and 4 to install the wall anchors into the drywall.
Ensure that wall anchors are placed 2 ft (0.61m) apart.
b. Align the holes of the provided wall
clips with the wall anchors and using a
screwdriver, hand tighten a screw into
each wall clip.
c. Place cords into the wall clips and pull
tightly to align wall clip hole to wall
anchor.
(0.9 m)
3’
d. Close the top cover to secure the cord in place and insert
provided screw and tighten into wall anchor.
e. The cord can also be tucked
under the slots on the left
or right side of the monitor’s
base for additional cord
management.
Wall
(right side)
Top
(left side)